Explorer AWD V8-4.6L (2010)
Alarm System Transmitter: Service and Repair
Passive Anti-Theft System (PATS) Transceiver
Removal and Installation
1. Remove the steering column opening cover. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
2. Remove the ignition lock cylinder. For additional information, refer to Doors, Hood and Trunk &/or Locks.
3. Remove the 3 screws and the lower steering column shroud.
4. Using a suitable tool (such as a dentist pick), to release the tabs, remove the Passive Anti-Theft System (PATS) transceiver.
1. Disconnect the electrical connector.
5. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster (IC) again.
To install, reverse the removal procedure.