Reset Procedure for Driver/Vehicle Information Display
Driver/Vehicle Information Display: Reset Procedure
Message Center Configuration
Oil Life Reset And Start Value - With Message Center
NOTE: The oil life calculation is set at a maximum of approximately 12,000 km (7,500 miles) or 180 days.
1. From the setup menu, press and release the RESET button to display HOLD RESET IF NEW OIL.
2. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.
3. The message center displays OIL LIFE SET TO 100%.
4. Once the message center displays OIL LIFE SET TO 100%, release the RESET button then press and release the RESET button to reduce the start
value (10% for each button press).
Oil Life Reset And Start Value - Without Message Center
NOTE: Oil life calculation is set at a maximum of approximately 12,000 km (7,500 miles) or 180 days.
NOTE: All message center functions are carried out using the single stem reset button in the Instrument Cluster (IC).
1. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET IF NEW
OIL.
2. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO 100%.
3. Once OIL LIFE SET TO 100% is displayed, press and hold the SELECT/RESET button for more than 2 seconds until the message center displays
OIL LIFE SET TO XXX%.
4. Press and release the SELECT/RESET button to reduce the start value (10% for each button press).
5. Press and release the SELECT/RESET button to exit the procedure.
