Explorer AWD V8-4.6L (2010)
Removal and Installation
1. Remove the rear door trim panel assist handle cover.
2. Remove the rear door trim panel assist handle screws.
3. Remove the rear door trim panel handle bezel cover.
4. Remove the rear door trim panel handle bezel screws.
5. Remove the rear door trim panel lower screw.
6. NOTICE: To avoid damaging the trim panel, do not pull the bottom of the panel outward.
Remove the rear door trim panel by lifting upward on the armrest to disengage the panel clips.
7. Disconnect the electrical connectors.
8. Disconnect the rod cable from the rear door trim panel.
9. To install, reverse the removal procedure.
