Explorer AWD V8-4.6L (2010)
Cross-Member: Service and Repair
Crossmember - 1B
Crossmember - 1B
Crossmember 1B
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, Vehicle Jacking and Lifting.
2. Remove the 4 crossmember bolts.
3. Remove the 4 crossmember nuts.
-
To install, tighten to 103 Nm (76 lb-ft).
4. Remove the 1B crossmember.
5. To install, reverse the removal procedure.
