Explorer AWD V8-4.6L (2010)
4. Remove the cowl trim panel.
1. Remove the pin-type retainer.
2. Remove the cowl trim panel.
All vehicles
5. To install, reverse the removal procedure.
D-Pillar Trim Panel
D-Pillar Trim Panel
Removal and Installation
Vehicles with third row seating
1. Remove the rear cargo management system.
-
Remove the screw.
-
Remove the pushpin.
-
Remove the system.
2. Remove the D-pillar lower safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
All vehicles
3. Position the liftgate opening weatherstrip aside.
4. Remove the rear upper headliner trim panel.
