Explorer AWD V8-4.6L (2010)
Disassembly and Assembly
All seats
1. Remove the front seat. For additional information, refer to Seat - Front See: Service and Repair/Front Seat/Seat - Front.
2. Remove the seat track. For additional information, refer to Seat Track See: Seat Track/Service and Repair/Seat Track.
3. Remove the front seat backrest. For additional information, refer to Seat Backrest - Front See: Seat Back/Service and Repair/Removal and
Replacement/Front Seat/Seat Backrest - Front.
4. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
cushion foam pad.
Release the hook-and-loop strips, remove the hog rings and separate the cushion trim cover from the cushion foam pad.
Seat with heat
5. If necessary, remove the cushion heated seat mat and route out the wire harness through the cushion foam pad opening.