Explorer AWD V8-4.6L (2010)
Disconnect the side air bag module electrical connector and if equipped the heated seat electrical connector and route the wire harness(es) out of the
seat cushion frame. See Figure 11.
1. Disconnect the side air bag module electrical connector and release the pin-type retainers.
2. If equipped with a heated seat disconnect the heated seat electrical connector and release the pin-type retainers.
3. Route the wire harness(es) out of the seat cushion frame.
NOTE:
Heated seat shown, non-heated seat similar.
17. NOTE: For proper routing during assembly, note the routing of the side air bag module wire harness and the pin-type retainers.
