Explorer AWD V8-4.6L (2010)
Truck Bed Storage Compartment Weatherstrip: Service and Repair
Pickup Bed Storage Compartment Seal - Side Compartment
Pickup Bed Storage Compartment Seal - Side Compartment
1. Remove the side compartment lid. For additional information, refer to Pickup Bed Storage Compartment Lid - Side Compartment See: Truck
Bed/Truck Bed Storage Compartment/Truck Bed Storage Compartment Door / Cover/Service and Repair/Pickup Bed Storage Compartment Lid -
Side Compartment.
2. NOTE: The storage compartment seal is installed over the hinge assembly.
Remove the storage compartment seal from the storage compartment.
-
Remove any adhesive or residual seal material.
-
Clean the lid surface with a 50/50 solution of alcohol and water.
-
Apply adhesive promotor.
-
Apply seal.
-
Apply pressure to the seal with a roller and allow seal to cure before installation for one hour.
3. To install, reverse the removal procedure.
