Explorer AWD V8-4.6L (2010)
Stage 2: Tighten an additional.................................................................................................................................................................................90 degrees.
Tighten the 10 jackscrews against the cylinder block in the sequence shown in 2 stages.
Stage 1: Tighten to..........................................................................................................................................................................................5 Nm (44 lb-in).
Stage 2: Tighten to........................................................................................................................................................................................10 Nm (89 lb-in).
Install the 10 side bolts and tighten them in the sequence shown.
Tighten to.......................................................................................................................................................................................................21 Nm (15 lb-ft).
