Explorer AWD V8-4.6L (2010)
5. Connect the crankcase breather tube to the RH valve cover.
6. Attach the heater hose retainer to the RH valve cover.
7. Attach the wiring harness pin-type retainer to the front of the RH valve cover.
8. Attach the wiring harness retainers to the RH valve cover studs.
9. Connect the RH VCT oil control solenoid electrical connector.
10. Connect the engine wiring harness to the PCM.
-
Position the wiring harness and attach the wiring harness pin-type retainer to the PCM bracket.
-
Connect the in-line electrical connector.
-
Connect the 2 PCM electrical connectors.
11. Install the RH ignition coils. For additional information, refer to Ignition System.
12. Install the ACL and the ACL outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
