Explorer AWD V8-4.6L (2010)
7. NOTE: The A/C clutch pulley is a tight fit on the A/C compressor head. It must be correctly aligned during installation.
Install the A/C clutch pulley.
8. Install the A/C clutch pulley snap ring with the bevel side out.
9. Place one nominal thickness A/C clutch disc and hub spacer inside the clutch hub spline opening.
10. Install the A/C clutch disc and hub assembly.
11. Install the A/C clutch disc and hub bolt.
1. Hold the A/C clutch disc and hub with the Compressor Clutch Disc and Hub Holding Fixture.
2. Install the A/C clutch disc and hub bolt.
-
Tighten to 14 Nm (124 lb-in).
12. Measure and adjust the clutch air gap by removing or adding A/C clutch hub spacers.
13. Install the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - 4.0L SOHC See: Service and Repair or Air
Conditioning (A/C) Compressor - 4.6L See: Service and Repair.