Explorer AWD V8-4.6L (2010)
Fluid Filter - A/T: Service and Repair
6R80
Fluid Pan, Gasket and Filter
Removal
NOTICE: The use of any transmission fluid other than specified can result in the transmission failing to operate in a normal manner or
transmission failure.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the transmission fluid fill plug transmission fluid level indicator assembly located on the passenger side front portion of the transmission
case. Removal of the transmission fluid fill plug will relieve any vacuum that might have built up in the transmission. This will aid in allowing the
transmission fluid pan to be easily removed when the bolts are removed.
3. Remove the transmission fluid pan and allow the transmission fluid to drain.
4. Remove the transmission fluid pan gasket.
5. NOTE: The transmission fluid filter may be reused if no excessive contamination is indicated.
Remove and discard the transmission fluid filter.
6. Clean and inspect the transmission fluid pan and magnet.