Explorer AWD V8-4.6L (2010)
1. With the vehicle in PARK, position it on a hoist. Set the vehicle as close to level as possible. For additional information, refer to Vehicle Jacking
and Lifting.
2. Remove the transmission fluid pan drain plug (large plug) and allow the transmission fluid to drain.
Refill
1. Install the transmission fluid pan drain plug.
-
Tighten to 26 Nm (19 lb-ft).
2. Hold the larger transmission fluid pan drain plug with a wrench and remove the small (center) transmission fluid level indicator plug.
3. Install the Transmission Fluid Fill Tool into the transmission fluid pan.
4. NOTE: Prior to filling the Transporter Fluid Evacuator/Injector with transmission fluid, make sure that the canister is clean.
Fill the Transporter Fluid Evacuator/Injector with transmission fluid.
5. Hang the Transporter Fluid Evacuator/Injector under the vehicle, upright and close to the transmission.