Explorer AWD V8-4.6L (2010)
Axle Nut: Specifications
Front Drive Halfshafts (4WD)
Remove and discard the halfshaft nut.
To install, tighten the new nut to................................................................................................................................................................250 Nm (184 lb-ft).
Rear Drive Halfshafts
NOTICE: Install and tighten the new halfshaft nut to specification within 5 minutes of starting it on the threads. Always install a new halfshaft
nut after loosening or when not tightening within the specified time or damage to the components may occur.
Install a new halfshaft nut.
Tighten to...................................................................................................................................................................................................275 Nm (203 lb-ft).
