Explorer AWD V8-4.6L (2010)
7. Using the Heavy-Duty Transmission and Power Steering Fluid X-Changer, add 0.5L (1 pt) of transmission fluid. Allow the transmission fluid to
drain. When the transmission fluid comes out as a thin stream or a drip, the transmission fluid is at the correct level.
8. Install the transmission fluid level indicator plug (short hex).
-
Tighten to 10 Nm (89 lb-in).
9. Once the transmission fluid exchange is complete and the fluid is at the correct level, disconnect the Heavy-Duty Transmission and Power Steering
Fluid X-Changer. Reconnect any disconnected transmission fluid cooler tubes.
Transmission Fluid Drain and Refill
Transmission Fluid Drain and Refill
