Explorer AWD V8-4.6L (2010)
Installation
NOTE: If the transmission is being repaired for a contamination-related failure, install a new transmission fluid filter and seal assembly. The
transmission fluid filter may be reused if no excessive contamination is indicated.
1. Inspect the transmission case for the transmission fluid filter seal. If the seal is in the case, carefully remove the seal without scratching the case.
2. Make sure that the seal is on the transmission fluid filter and lubricate the seal with automatic transmission fluid.
3. NOTE: The transmission fluid filter may be reused if no excessive contamination is indicated.
If required, install a new transmission fluid filter.
4. Position the magnet in the transmission fluid pan.
5. NOTE: The transmission fluid pan gasket can be reused if not damaged.
Install a new transmission fluid pan gasket if required.
