Explorer AWD V8-4.6L (2010)
1. Lock tab.
2. Selector lever cable end.
3. Manual control lever.
8. Disconnect the selector lever cable from the selector lever cable bracket and remove the selector lever cable.
Vehicles equipped with a 5R55S transmission
9. Remove the selector lever cable shield by prying on the side of the selector lever cable shield closest to the boot, then sliding the shield away from
the boot.
10. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
Unlock the lock tab and disconnect the selector lever cable end from the manual control lever.
11. Disconnect the selector lever cable from the bracket and remove the selector lever cable.
Installation