Explorer AWD V8-4.6L (2010)
Driveshaft - Rear, One-Piece
Driveshaft - Rear, One-Piece, 4.6L (3V)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. If equipped, remove the skid plate.
3. Index-mark the driveshaft flange to the transfer case rear output flange to maintain driveshaft balance.
4. Index-mark the driveshaft flange to the pinion flange to maintain driveshaft balance.
