Explorer FWD L4-2.0L Turbo (2011)
13. Remove the front engine roll restrictor bolt.
14. Using a wax pencil (or equivalent) apply witness marks to the vehicle and subframe to aid in installation.
15. Position the 300-OTC1585AE under the subframe assembly.
16. NOTE: RH shown, LH similar.
Remove and discard the subframe bracket-to-body bolts.
17. NOTE: RH shown, LH similar.
Remove and discard the rear subframe bolts and remove the subframe brackets.
18. NOTE: RH shown, LH similar.
Remove and discard the front subframe bolts.