Explorer FWD L4-2.0L Turbo (2011)
19. Lower the subframe assembly from the vehicle.
Installation
1. NOTICE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in
major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute
design. Tighten fasteners as specified.
Using the 300-OTC1585AE, raise and align the subframe to the witness marks made during removal.
2. NOTE: RH shown, LH similar.
Install the 2 new front subframe bolts.
-
Tighten to 200 Nm (148 lb-ft).
3. NOTE: RH shown, LH similar.
Position the subframe brackets and install the 4 new bolts finger-tight.
4. NOTE: RH shown, LH similar.
Install the 2 new rear subframe bolts.
-
Tighten to 200 Nm (148 lb-ft).
5. NOTE: RH shown, LH similar.
