2011 Explorer FWD L4-20L Turbo: Rear Subframe Service and Repair Guide
12. Adjust the parking brake cable tension. REFER to Parking Brake Cable Tension Release.
13. Connect the subframe assembly main electrical connector.
14. Install the 2 new rear shock absorber lower bolts.
-
Tighten to 175 Nm (129 lb-ft).
15. Using a suitable jackstand, support the lower control arm.
16. Position the sway bar and install the 2 new sway bar link upper nuts.
-
Tighten to 150 Nm (111 lb-ft).
17. Remove the jackstand from the lower control arm.
18. NOTE: If equipped, align the driveshaft using the index-mark made during removal.
If equipped, position the driveshaft and install the 6 new driveshaft bolts.
-
Tighten to 25 Nm (18 lb-ft).
19. Install the muffler and tail pipe.
20. Install the rear wheels.