Rear Subframe Mount Bushings for Rear Differential
Rear Subframe Mount: Service and Repair
Subframe Bushings - Rear Differential, Rear
Subframe Bushings - Rear Differential, Rear
Exploded View
Removal
1. NOTE: There are 2 RDU rear bushings in the rear subframe. This procedure shows how to remove one bushing. The procedure for the remaining
RDU bushing is identical.
Remove the RDU.
2. NOTE:
-
The RDU 204-618 /1 must be used to remove the bushing to make sure that it passes through the receiver cup.
-
Make sure the RDU 204-616 /2 is positioned with the larger opening toward the bushing to act as the receiver cup.
-
Make sure the arrow on the RDU 204-616 is pointed toward the rear subframe when removing the bushing.
Assemble the RDU 204-618 and the 204-616 to the rear subframe and press out the bushing.
