Explorer Sport 2WD V6-245 4.0L SOHC VIN K SFI (2001)
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
^
If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
25. Install the front safety belt anchor.
1
Position the front safety belt retractor.
2
Using the special tool, install the front safety belt anchor bolt.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
26. Reposition the carpet at the front safety belt anchor.
27. Align the retaining clips and install the front door scuff plate.
28. Align the retaining clips and install the windshield side garnish molding.
29. Reposition the rear seat back upward.
