Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Rear Bumper Cover / Fascia: Service and Repair
REAR BUMPER COVER
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Disconnect the two license plate lamps.
2. Remove the four splash shield screws (two each side).
3. Remove the two rear bumper cover rivets (one each side).
4. NOTE: Align the rear bumper cover to the rear bumper beam guide holes when installing the step pads
Remove the two step pads (one each side).