Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
1. Install the hood latch cable.
1
Install the hood latch cable.
2
Install the cable conduit.
2. Position the hood latch and install the bolts.
3. Align the hood latch.
1
loosen the hood latch bolts enough to allow for movement of the hood latch.
2
Align the hood latch with the hood latch striker.
4. Tighten the hood latch bolts.
5. Verify the hood latch striker is fully engaging the hood latch.
-
If necessary, use Multi-Purpose Grease Spray F5AZ-19G209-AA or equivalent meeting Ford specification ESR-M1C159-A to lubricate the
latch.
-
Repeat the install procedure as necessary to make sure the hood latch is aligned correctly.
