Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
15. Remove the quarter trim panel front screw.
-
Position the carpet aside to gain access to the screw.
16. Remove the three quarter trim panel rear screws.
-
Position the carpet aside to gain access to the screws.
17. If equipped, remove the rear door lock control switch assembly.
-
Disconnect the electrical connector.
18. Remove the quarter trim panel.
1. Remove the eight pin-type retainers.
2. Feed the safety belt webbing through the opening in the quarter trim panel.
3. Remove the quarter trim panel.
19. To install, reverse the removal procedure.
Trim Panel - B-Pillar
B-PILLAR TRIM PANEL