Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Trunk / Liftgate Lock Cylinder: Service and Repair
REMOVAL
NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair
package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.
1. Remove the liftgate latch remote control.
2. Remove the liftgate lock cylinder.
1
Remove the nuts.
2
Remove the liftgate lock cylinder.
-
If equipped, disconnect the electrical connector.
INSTALLATION
1. To install, reverse the removal procedure.