Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
PLEASE REFER TO THE APPROPRIATE VEHICLE WORKSHOP MANUAL TO DETERMINE LOCATION OF THE FRONT AIR BAG
SENSORS.
THE SIDE AIR BAG SENSORS ARE LOCATED AT OR NEAR THE BASE OF THE B-PILLAR.
TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND WAIT AT LEAST
ONE MINUTE. BE SURE TO DISCONNECT AUXILIARY BATTERIES AND POWER SUPPLIES (IF EQUIPPED).
5. Remove the tie-strap and disconnect the passenger seat side air bag electrical connector.
6. Attach the restraint system diagnostic tool to the passenger seat side air bag floor electrical connector.
7. Remove the safety belt buckle support bolt cover plug.