Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
3. Remove the seat backrest.
INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
40 Percent Portion of 60/40 Split Bench
REMOVAL
1. Remove the seat.
2. Remove the seat backrest.
INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
50/50 Split Bench
REMOVAL
1. Fold the rear seat cushion assembly forward.
2. Remove the retaining nut from the end of the link arm and slide the link arm from the stud on the seat cushion frame.
3. Return the seat back assembly to the upright position.
4. Remove the retaining nuts from the front floor attachment.
5. Remove the seat cushion assembly from the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
60 Percent Portion of 60/40 Split Bench
REMOVAL
1. Remove the seat.
2. Remove the seat backrest.
INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
