ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Removal And Installation|Page 11065 > < Removal And Installation|Page 11063
Page 16
background image

30. Position the lower steering column opening finish panel reinforcement and install the bolts.

31. Install the lower steering column opening finish panel.

1

Position the lower steering column opening finish panel to the instrument panel. Push in the top of the lower steering column opening finish
panel to seat the retaining clips.

2

Install the screws.

32. Position the hood release handle and install the screws.
33. Connect the battery ground cable.
34. With all the diagnostic tools removed, prove out the air bag system.

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.

35. Check the restraint system for correct operation.

Passenger Side

Removal And Installation|Page 11065 > < Removal And Installation|Page 11063