Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
31. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
32. Install the passenger air bag module.
33. Connect the battery ground cable.
34. With all the diagnostic tools removed, prove out the air bag system.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
35. Check the restraint system for correct operation.
Without Side Air Bag
DISASSEMBLY
1. Remove the seat.
2. Remove the seat cushion.
3. Disconnect the seat backrest recliner actuator.
1
Remove the screws.
2
Disconnect the seat backrest recliner actuator.
4. Remove the seat cushion frame from the seat cushion foam.
1
Unhook the seat cushion trim cover J-clips.
