Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
12. Install the seat cushion frame.
1
Position the seat cushion frame.
2
Hook the seat cushion trim cover J-clips.
13. Connect the seat backrest recliner actuator.
1
Connect the seat backrest recliner actuator.
2
Install the screws.
-
Tighten until the screws are fully seated.
14. Install the seat cushion.
15. Install the seat.
16. Check the restraint system for correct operation
40 Percent Portion of 60/40 Split Bench
DISASSEMBLY
1. Remove the rear seat.
2. Remove the rear seat legs.
1
Remove the pivot bolts.
2
Remove the rear seat legs.
3. Unhook the seat cushion trim cover J-clips.