Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
1. CAUTION: Never reuse piston seals or dust boots.
NOTE: Never reuse brake fluid that has been drained from the hydraulic system or has been allowed to stand in an open container for an
extended period of time.
Lubricate the piston boot, caliper piston, piston seal, and cylinder bores with High Performance DOT 3 Motor Vehicle Brake Fluid
C6AZ-19542-AB or DOT 3 equivalent meeting Ford specification ESA-M6C25-A.
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot.
3
CAUTION: Be careful not to damage or dislodge the piston seal.
Insert the caliper piston.
4
Press the caliper piston into the caliper bore, being careful not to cock the caliper piston.
3. Install the disc brake caliper.
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
Removal
1. NOTE: 4x4 is shown, 4x2 is similar.
Remove the pads.
2. Remove the front disc brake caliper anchor plate.
1
Remove the two front disc brake caliper anchor plate bolts.
2
Remove the front disc brake caliper anchor plate.
Installation
