Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Camshaft: Service and Repair
RH
NOTE: Ford does not provide timing marks or additional information for servicing of the timing chains/sprockets without the special tools listed in
this procedure.
Camshaft-RH
Special Tool(s)
Removal
1. Remove the camshaft roller followers.
2. Remove the RH hydraulic camshaft tensioner.
5. CAUTION: The right-hand camshaft sprocket bolt is a lefthand threaded bolt.
Using the special tool, remove the bolt and the camshaft sprocket.
4. NOTE: Mark the position of the camshaft bearing caps so they can be installed in the original position.
Remove the bolts in the sequence shown and remove the camshaft bearing caps and the oil supply tube.