Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Spark Plug: Service and Repair
REMOVAL
1. Remove the spark plug wires from the spark plugs.
2. Remove the spark plugs.
NOTE:
^
Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
^
If an original spark plug is reused, make sure it is installed in the same cylinder it was taken from. New spark plugs can be used in any
cylinder.
3. Inspect the spark plugs.
4. Use a suitable spark plug gap tool to check and adjust the spark plug gap.
INSTALLATION
1. To install, reverse the removal procedure.
