Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
6. Remove the metallic Clip. Detach the transmission oil cooler lines.
7. Remove the bolt.
8. Remove the bolt and the A/c condenser core.
INSTALLATION
1. To install, reverse the removal procedure.
-
If a new A/C condenser core is to be installed, refer to refrigerant oil addition. See: Refrigerant Oil Addition.
-
If a new A/C condenser core is to be installed, a new A/C evaporator core orifice should also be installed.
2. Evacuate, leak test, and charge the A/C system.