Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
6. Disconnect the condenser to evaporator tube spring lock coupling.
7. Disconnect the vacuum harness connector. Remove the nut.
8. Remove two nuts, one bolt, and the A/C evaporator housing.
-
Remove the nut located at the bottom of the A/C evaporator housing first.
-
To remove the A/C evaporator housing, rotate the A/C evaporator housing counterclockwise. Then tip the evaporator core end towards the
front of the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.
-
Lubricate the refrigerant system with the correct amount of clean PAG Refrigerant Compressor Oil (R-134a Systems) or equivalent. See:
Refrigerant Oil Addition.
-
Install new O-ring seals lubricated in amount of clean PAG Refrigerant Compressor Oil (R-134a Systems) or equivalent.
-
Lubricate the coolant hoses with MERPOL(R) or plain water only, if needed.