Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
3. Position the oil pan magnet in the transmission fluid pan.
4. Install the transmission fluid pan.
1. Position a new transmission fluid pan gasket on the transmission fluid pan.
2. Install and align the transmission fluid pan.
^
Loosely install the transmission fluid pan screws.
5. Tighten the transmission fluid pan screws.
^
Use a crisscross sequence to tighten the transmission fluid pan screws.
6. If equipped, position the servo heat shield over the servos and clip it to the pan rail.
7. Lower the vehicle.
8. NOTE: When filling a dry transmission and converter, start with a minimum of 3.7 liters (4 quarts).
Fill transmission to the correct fluid level and check for correct transmission operation.
