Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
^
IF THE AIR BAG DEPLOYMENT CHUTE IS NOT PROPERLY POSITIONED AND COMPLETELY ZIPPED, THE SIDE AIR BAG
MAY NOT DEPLOY PROPERLY.
13. Zip the air bag deployment chute completely closed, then position the zipper tail at the top of the deployment chute, into the seat back opening.
^
The side air bag deployment chute must encircle the side air bag module, going completely around the side air bag module and the side of the
seat back frame.
^
Align the side air bag deployment chute to the side air bag module, making sure it covers the length of the side air bag module.
NOTE: Be sure the side air bag deployment chute is properly positioned, before proceeding.
14. Position the deployment chute tail and side air bag wire harness and tie-strap them in place.
15. Unroll the seat back trim cover to the bottom row of hog rings.
16. Install the swing rods back into the seat back trim cover sleeves.
17. Reaching between the seat back trim cover and the seat back pad, at the middle row of hog rings, position the top of the swing rods under the
