Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
10. Connect the clockspring electrical connector at the base of the steering column.
11. Position the lower steering column opening finish panel reinforcement and install the bolts.
12. Install the lower steering column opening finish panel.
1
Position the lower steering column opening finish panel to the I/P and push in at the top seating the retaining clips.
2
Install the screws.
13. Position the hood release handle and install the screws.
14. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
