Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
54. Connect the clockspring electrical connector at the base of the steering column.
55. Position the lower steering column opening finish panel reinforcement and install the bolts.
56. Install the lower steering column opening finish panel.
1
Position the lower steering column opening finish panel to the I/P and push in at the top seating the retaining clips.
2
Install the screws.
57. Position the hood release handle and install the screws.
58. Connect the battery ground cable.
59. With all the diagnostic tools removed, prove out the air bag system. See: Air Bag(s) Arming and Disarming
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
