Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
26. Install the seat bottom lower side shield into the seat bottom frame.
1
Align the seat bottom lower side shield retaining clips to the seat bottom.
2
Push in on the lower side shield, seating the clips (one shown) into the seat bottom frame.
27. Install the lower side shield screw.
28. Install the lower side shield retaining screw and the lumbar support handle.
29. Position the seat track to the seat bottom frame. Install the tour bolts and tighten to specification.
30. Position the passenger seat into the vehicle. Install and hand tighten the four seat track-to-floor bolts
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result
in damaged components.
