Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
12. Install the driver seat rear track bolt covers.
13. Connect the safety belt warning indicator electrical connector.
14. Using the special tool, install the safety belt buckle support assembly bolt.
15. Install the safety belt buckle support assembly bolt cover.
16. Position the driver seat rearward.
17. Disconnect the battery ground cable and wait at least one minute.
WARNING:
^
TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BACKUP POWER SUPPLY MUST BE
DEPLETED BEFORE REPAIRING OR REPLACING ANY FRONT OR SIDE AIR BAG SUPPLEMENTAL RESTRAINT
SYSTEM (SRS) COMPONENTS AND BEFORE SERVICING, REPLACING, ADJUSTING OR STRIKING COMPONENTS NEAR
THE FRONT OR SIDE AIR BAG SENSORS, SUCH AS DOORS, INSTRUMENT PANEL, CONSOLE, DOOR LATCHES,
STRIKERS, SEATS AND HOOD LATCHES.
