Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
16. Position the washer on the rear safety belt guide bolt.
17. Install the rear safety belt guide.
1
Position the rear safety belt guide.
2
Using the special tool, install the rear safety belt guide bolt.
3
Reposition the rear safety belt guide cover around the safety belt guide.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
18. Fold the rear seat into the load floor position.
19. Install the rear safety belt anchor.
1
Position the rear safety belt anchor so that the anti-rotation tab is seated in the seat bracket slot.
2
Install the bolt.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
20. Reposition the carpet back over the floor.
