Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
6. Disconnect the front seat cushion side shield.
CAUTION: Use care when disconnecting the seat cushion side shield from the seat cushion frame so the tabs on the seat cushion side shield are
not damaged.
7. Remove the front seat cushion side shield.
8. Remove the 6-way power seat switch.
-
Remove the screws, then remove the 6-way power seat switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Check the restraint system for correct operation.
