Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
8. Using a suitable jack, support the front suspension lower arm.
9. CAUTION: Secure the front axle shaft to prevent it from overextending. Failure to do so can cause damage to the front axle shaft.
Support the front axle shaft with wire.
10. Remove the tie-rod end castellated nut.
1. Remove and discard the cotter pin.
2. Remove and discard the castellated nut.
11. CAUTION: Do not use a hammer to separate the tie-rod from the wheel knuckle or damage to the wheel knuckle will result.
CAUTION: Do not damage the tie-rod boot when installing the special tool.
