Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
17. Tighten the transmission fluid pan screws.
^
Use a crisscross sequence to tighten the transmission fluid pan screws.
18. If equipped, position the servo heat shield over the servos and clip it to the pan rail.
19. Lower the vehicle.
20. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur While the vehicle relearns its
adaptive strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary
condition and will eventually return to normal operating condition.
Connect the battery ground cable.
21. Fill transmission to correct fluid level and check for correct transmission operation.
^
Use MERCON(R) V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON(R) V specification.
