Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
9. Fill the CV joint housing with 200 grams (4.71 ounces) of grease.
^
Use Constant Velocity Joint Grease (High Temp) E43Z-19590-A or equivalent meeting Ford specification ESP-M1C207-A.
10. Position the CV joint housing onto the inboard CV joint.
11. NOTE: Clean the front wheel halfshaft joint boot mounting surfaces of excess grease before installing the boot.
Position the front wheel halfshaft joint boot and the front wheel halfshaft joint boot clamp.
1. Position the front wheel halfshaft joint boot.
2. Position the front wheel halfshaft joint boot clamp.
