Explorer Sport 4WD V6-245 4.0L SOHC VIN K SFI (2001)
7. Secure the rear window glass in the full up position.
NOTE: When securing the rear window glass note that the rear window glass and module will be removed with the rear window glass in the
secured position.
8. Remove the 12 rear window glass module nuts.
9. Push the rear window glass module out at the top.
10. Lift the rear window glass module from the rear of the cab to disengage the locating clip.
NOTE: In order for the rear widow glass to function correctly the locating clip must engage the pinch weld at the rear of the cab during
installation.
11. Remove the excess foam butyl from the window opening.
12. If necessary, remove the center rear window glass from the module.
INSTALLATION