Explorer Sport Trac 2WD V6-245 4.0L SOHC VIN K SFI (2001)
28. Position the hood release handle and install the screws.
29. Connect the battery ground cable.
30. With all the diagnostic tools removed, prove out the air bag system.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
31. Check the restraint system for correct operation.
Without Side Air Bag
REMOVAL
1. Remove the seat.
2. Remove the seat track.
3. Remove the seat backrest.
INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
With Side Air Bag
Special Tool(s)
SPECIAL TOOL(S)
REMOVAL
